Hello,
I have a T Reg/1999 Ford Fiesta Mk VI. I needed a new headlight and so we got one from a scrapyard to replace the one I had, which had to be changed due to my partner hitting a pheasant and it broke part of the plastic housing and was held in by 1 screw. We had replaced the passenger one from a scrapyard one before and know how to change one however as we went to replace it, I was checking the lights and the indicator started clicking a lot then suddenly stopped, no indicators, no clicking, no hazards.
We have checked the fuses and the one for the indicators had blown, so we changed it and to begin with had no luck. We then changed the flasher unit on the steering column and seem to have the indicators working but the hazard lights wont work and neither will the horn, which I have the understanding that they work off the same switch.
We have checked the fuses again, all of the ones in the engine and by the steering wheel, we have checked and changed the relays and even tried another hazard light switch from another fiesta but it doesn't seem to work. The horn still works as we have tested this but we don't know what could be causing the hazards to not work. We have also been looking in the Haynes manual and found they are both off the multifunction switch.
Any ideas or help would be great.
Thanks
Jayne
I have a T Reg/1999 Ford Fiesta Mk VI. I needed a new headlight and so we got one from a scrapyard to replace the one I had, which had to be changed due to my partner hitting a pheasant and it broke part of the plastic housing and was held in by 1 screw. We had replaced the passenger one from a scrapyard one before and know how to change one however as we went to replace it, I was checking the lights and the indicator started clicking a lot then suddenly stopped, no indicators, no clicking, no hazards.
We have checked the fuses and the one for the indicators had blown, so we changed it and to begin with had no luck. We then changed the flasher unit on the steering column and seem to have the indicators working but the hazard lights wont work and neither will the horn, which I have the understanding that they work off the same switch.
We have checked the fuses again, all of the ones in the engine and by the steering wheel, we have checked and changed the relays and even tried another hazard light switch from another fiesta but it doesn't seem to work. The horn still works as we have tested this but we don't know what could be causing the hazards to not work. We have also been looking in the Haynes manual and found they are both off the multifunction switch.
Any ideas or help would be great.
Thanks
Jayne
